Skip to main content
OpenEye Knowledge Base

OE-C3226F12 Quick Start Guide

  1. Last updated
  2. Save as PDF
Coming Soon!
OE-C3226F12 Quick Start Guide

Click the link if you need to download the original hardcopy of the OE-C3226F12 Quick Start Guide included with the boxed contents.

Box Contents

OE-C3226F12 cameras come with a security torx tool, self-tapping screws and plastic anchors (x3), mounting template, 12-pin terminal block, and RJ45 install tool and grommet. Identify the following components to make sure everything has been properly included with your new recorder. If any of the following items are missing, contact the dealer to arrange a replacement.

C3226F12_line.png

OE-C3226F12 Fisheye Camera

Security_Torx_Tool.png

Security Torx Tool

Screws and Anchors.png

Self-Tapping Screws/M4/6.8MM (x3) & Plastic Anchors 4-5MM (x3)

C3226F12_Mounting_Plate_line_drawing.png

Mounting Template

C3226F12_12pin_terminal.png

12-Pin Terminal Block

CC3226F12_Grommet_Insert.png

RJ45 Install Tool and Grommet
Connections

Camera Connections

C3226F12_connector_1.png C3226F12_connector_2.png  C3226F12_connector_3.png

 

No Connector Pin Definition  
1 RJ-45 Port - For network and PoE connections
2 Power (DC12V) & Alarm & Audio I/O 1 Audio In R
2 Audio Out R
3 Audio In L
4 Audio Out L
5 GND
6 GND
7 Alarm Out +
8 Alarm In +
9 Alarm Out -
10 Alarm In -
11 DC 12V+
12 DC 12V-
3 Built-in Microphone - Audio In  NOTE: Do NOT connect external power supply to the alarm I/O connector of the camera.
4 microSD Card Slot - Insert the SD card into the card slot to store videos and snapshots. Do not remove the SD card when the camera is powered on.
5 Default Button - Press the button with a proper tool for at least 20 seconds to restore the system.
RJ45 Cable Grommet

RJ45_Grommet_Connector.png

# Name
1 Grommet
2 RJ45 Install Tool
Power Connection

This camera is compatible with DC12V and Power over Ethernet (PoE). Connect power to the camera using the terminal connector blocks.

Default Username and Password

*OpenEye IP cameras ship without a default password.

Username: admin

The admin user password can be set using the following methods:

  1. OpenEye recorders running Apex 2.6 or newer will automatically set a new unique password when added in setup, if a new password has not already been set.

NOTE: You can set your Default Camera Password under the General Settings page within Setup > System Settings > General Settings. For instructions on defining your unique camera password, visit Default Camera Password.

  1. Connect to the camera directly through a Web Browser and follow the onscreen prompts.
  2. Use the Network Camera Manager (NCM) Utility.

NOTE: More on the NCM Software can be found at Network Camera Manager.

NOTE: Refer to your recorder manual or quick start guide for instruction on adding cameras.

Assigning an IP Address

OpenEye IP cameras are set to DHCP by default. If a DHCP server is not detected after 2 minutes, the camera will default to IP address 192.168.51.2. If you are not using a DHCP server, NCM will allow you to batch configure a static IP address. The default IP address for the camera network on your recorder is 192.168.51.1.

Selecting multiple cameras and entering IP address 192.168.51.2 will set an IP address on all selected cameras, starting at 192.168.51.2 and increase per camera.

  1. Open the Network Camera Manager application.
  2. Select applicable camera(s).
  3. Input starting IP address, Subnet Mask, Gateway, DNS.
  4. Apply changes.
  5. Wait 60 seconds before refreshing NCM.

NOTE: See Network Camera Manager for more information.

Connecting to the IP Camera

To access the camera setup menu, you need to open Network Camera Manager (NCM) utility. NCM is pre-installed on all OpenEye Recorders and is also available for download on the OpenEye website for installation on your personal computer or laptop.

  1. Open Network Camera Manager.
  2. Locate your camera on the Network Camera Manager list.
  3. To open the web browser, select the camera and click LOAD.
Product Features
Camera
Maximum Resolution 3520x3520
Max Frame Rate Primary Stream: 30FPS @ 3520x3520
Video Streams 4
Day / Night True Day/Night with IR-Cut Filter
Wide Dynamic Range (WDR) True WDR
Environmental and Power
Power Consumption Max 6.5W
Power Source PoE 802.3af
Operating Temperature

-4°F ~ 122°F (-20°C ~ 50°C)(IR ON)

-4°F ~ 140°F (-20°C ~ 60°C)(IR OFF)
Ingress Protection IP66
Impact Rating IK10
  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Article type
    Reference
  2. Tags
    This page has no tags.