Skip to main content
OpenEye Knowledge Base

OE-C9112F12 Hardware Manual - Features and Contents

Important Safeguards

View Important Safeguards before installing the camera.


View the Product Warranty for the camera.

Product Description

The OE-C9112F12 outdoor 12MP IP fisheye camera is equipped with a 1.65mm fixed lens for 360° single-camera coverage in ultra high-definition. True WDR, true day/night, and adaptive IR technology ensure the OE-C9112F12 provides only exceptional image quality in diverse lighting environments. Adaptive IR technology enhances low-light image performance by adjusting IR output to prevent overexposure of objects as they move closer to the camera. Additional features include audio in/out, as well as alarm in and relay out connections supported by the enhanced remote monitoring capabilities of the OWS platform.

The OE-C9112F12 is ONVIF™ and NDAA compliant, and fully compatible with the OpenEye Web Services platform, allowing multiple users to concurrently view high-quality images and set up cameras and recorders remotely using a web browser.

Camera Dimensions

C9112F12 Camera Line Dimensions.png


C9112F12 Camera Connections.png  C9112F12 Camera Reset Button and MicroSD Card.png

1 RJ-45 For connector and PoE connections
2 Audio I/O Pink Audio In (Line In)
Green Audio Out (Line Out)
3 Power (12vDC)* Black DC 12V -
Red DC 12V +
4 Alarm I/O 1 Alarm In -
2 Alarm In +
3 Alarm Out -
4 Alarm Out +
5 Reset Button

To restore the camera to factory defaults:

  1. Disconnect power for 30 seconds.
  2. Reconnect power and wait 30 seconds.
  3. Press and hold the reset button for 20 seconds.
6 MicroSD Card Slot

Supports up to 512GB microSD card for Edge storage.

Do not add or remove the microSD card when the camera is powered on.

*12vDC power input port should be plugged when not in use.

Power Connection

For an adequate power connection, use a 12vDC adaptor. Alternatively, you can power the camera by PoE if a Power Sourcing Equipment (PSE) switch is available. Ensure that the camera’s power cable is correctly and firmly connected.

NOTE: OpenEye recommends against using more than one power source at a time. Do not use a PoE power source when providing the camera with 12vDC power.

If using Power over Ethernet (PoE), make sure Power Sourcing Equipment (PSE) is in use in the network.

  • True WDR @ 12MP
  • Edge Dewarping
  • 360° Coverage
  • Adaptive IR
  • Alarm I/O
  • Two-way Audio
  • IK10 Impact Protection Rating
  • IP66 Ingress Protection Rating
  • Smart Compression
  • NDAA Compliant
Box Contents

OpenEye C9112F12-S cameras come with self-tapping screws and plastic anchors, mounting template, torx tool, and a waterproof cable connector. Identify the following components to make sure everything has been properly included with your new recorder. If any of the following items are missing, contact the dealer to arrange a replacement.


C9112F12 Camera Line Drawing.png

OE-C9112F12-S Dome Camera

Screws and Anchors.png

Self-Tapping Screws and Plastic Anchors x3

C9112F12 Mounting Template.png

Mounting Template


waterproof cable connector.png


Waterproof Cable Connector


torx tool.png

Torx Tool

  • Was this article helpful?