Skip to main content
OpenEye Knowledge Base

OE-C1013D4-S Hardware Manual - Features and Contents

Important Safeguards

View Important Safeguards before installing the camera.


View the Product Warranty for the camera.

Product Description

The OE-C1013D4-S is a 4MP indoor IP micro dome camera equipped with a 4.0mm fixed lens and person, vehicle, and line crossing analytics. True WDR and true day/night functionality allow the camera to adapt to changing lighting conditions throughout the day to ensure high-quality images.

The internal cable termination makes for easier installations with no need to drill holes to pass cables or for the use of a backbox. Adaptive IR technology prevents overexposure of objects close to the camera further enhancing the low-light performance.

The OE-C1013D4-S can be ordered with a paintable, snap-on dome cover and is compatible with all 10-Series mounting accessories to fit a broad range of applications making it an excellent choice for users looking for a discreet smart dome camera.

Combine the analytics capabilities of this camera with OpenEye Web Services to receive real-time alerts, on person, vehicle or line crossing detection, sent directly to your mobile device or PC.

Camera Dimensions

C1011D4-S Line Measurements.png


C1011D4-S Connections.png

1 RJ45 - For network and PoE connections
2 Power (12vDC) 1 12vDC + Power Connection
2 GND -
3 Reset Button -

To restore the camera to factory defaults:

  1. Disconnect power for 30 seconds.
  2. Reconnect power and wait 30 seconds.
  3. Press and hold the reset button for 20 seconds.
4 Alarm & Audio I/O 1 Alarm Out + Audio connection
2 GND Ground connection
3 Audio In + Audio connection
4 GND Ground connection
5 Alarm Input Alarm connection
6 GND Ground connection
7 Alarm Output + Alarm connection
8 Alarm Output - Alarm connection
5 Built-in Microphone Audio In
6 microSD Card Slot

Supports up to 512GB microSD card for Edge storage.

Do not add or remove the microSD card when the camera is powered on.

Power Connection

For an adequate power connection, use a 12vDC adaptor. Alternatively, you can power the camera by PoE if a Power Sourcing Equipment (PSE) switch is available. Ensure that the camera’s power cable is correctly and firmly connected.

NOTE: OpenEye recommends against using more than one power source at a time. Do not use a PoE power source when providing the camera with 12vDC power.

If using Power over Ethernet (PoE), make sure Power Sourcing Equipment (PSE) is in use in the network.

  • Person, Vehicle, and Line Crossing Analytics
  • 4.0mm Fixed Lens
  • Internal Network Connection
  • Corridor Mode
  • NDAA Compliant
  • True WDR @ 4MP
  • Adaptive IR | Up to 98’
  • 4MP | Up to 30FPS
  • Audio I/O
  • Alarm I/O
  • Optional Paintable Dome Cover (Free Upon Request)
  • Built-in microphone
Box Contents

OpenEye C1013D4-S cameras come with self-tapping screws and plastic anchors, mounting template, and a torx tool. Identify the following components to make sure everything has been properly included with your new recorder. If any of the following items are missing, contact the dealer to arrange a replacement.

C1011D4 Dome Camera Line Drawing.png

OE-C1013D4-S Dome Camera

Screws and Anchors.png

Self-Tapping Screws and Plastic Anchors x3

C1012D2-S mounting template.png

Mounting Template



torx tool.png


Torx Tool

  • Was this article helpful?