OE-CC51D5 Hardware Manual - Features and Contents

LED Status Indicator

For more information on the LED Status Indicator, see Cloud Camera LED Status and Behaviors.

Reset Button

The reset button performs one of three actions depending on how long it is held:

Reboot: Hold reset button for 5 seconds to reboot.

• Status LEDs will be solid red during the reboot.

Partial Reset:  This option will retain Web Services account information and Network Settings while reverting all other settings to factory defaults.

• Hold reset button for 20 seconds to complete a Partial Reset.
• Status LEDs rapidly flash red and green when the camera is being restored to factory defaults.

Full Factory Reset: This option will reset the camera to factory defaults and format the internal storage.

• Hold reset button for 30 seconds to restore camera to factory defaults.
• Status LEDs rapidly flash red when the camera is being reset to factory defaults.

Power Connection

For an adequate power connection, use a 12vDC or 24vAC adaptor. Alternatively, you can power the camera by PoE+ using the PoE power injector provided with the camera, or if a Power Sourcing Equipment (PSE) switch is available.

NOTE: OpenEye recommends against using more than one power source at a time.

Installation

To prepare the camera for wall of ceiling installation with accessories, see instructions on the Quick Installation Guide.