Skip to main content
OpenEye Knowledge Base

External I/O Device

OE-ZIO4EXT

The OE-ZIO4EXT is a simple USB powered plug and play device, designed to provide sensor and relay functionality. The box includes the I/O device, two Phoenix connectors and velcro for easy installation. 

clipboard_e547d0ea5eabcd8f2bb7d4a5b718b83da.png

Setup

Linux:

  1. Plug USB into an available USB port (front or back)
  2. Reboot recorder
  3. There should now be 4 additional sensors and 4 additional relays under Sensors and Relays in Setup

Windows:

  1. Plug USB into an available USB port (front or back)
  2. Windows should detect the device and the install the driver automatically
  3. Reboot recorder
  4. There should now be 4 additional sensors and 4 additional relays under Sensors and Relays in Setup

Note: Apex 2.6.10 and above is required in order to properly detect the I/O device

Specifications

The external I/O device comes with 4x Form A sensor contacts and 4x Form A relay contacts which are set to Normally Open by default.

clipboard_e01cccd49e73b46b059a376165bf8b761.png
clipboard_e3e423c560beb5e4f112c4d5832879b33.png
Related Links

Sensor and Relay

  • Was this article helpful?